Direct Acting, Spool Type, Slip-in cartridge - PDRC04T30D
POA
The HYDAC proportional pressure control valve is a direct-acting 3-way spool-type valve.
When de-energised, port 2 is closed and port 1 (consumer) is connected to port 3 (tank). When the control flow increases, the solenoid coil applies a force that is proportional to
the control flow to the control spool, thus defining the pressure set at port 1. If, as the result of external factors, a pressure acts on port 1 that is greater than the set pressure, the valve will open from port 1 to tank port 3.
Product Advantages:
- Main applications: Pilot valve for directional spool valves and other main-stage valves, accumulator charging circuits, slewing angle adjustment on pumps, clutches.
- Very compact design
- Excellent small signal characteristics combined with low leakage
- Very good dynamics thanks to low coil inductance
- Stable operating behaviour thanks to self-venting after several actuations
- Robust spring design not affected by tank pressure spikes
- Extensive environmental trial test has been performed
- External surfaces with advanced corrosion protection due to ZnNi coating
(672 h salt spray test)
| Product | ||||||||
|---|---|---|---|---|---|---|---|---|
| No options of this product are available. | ||||||||
Please contact the store to confirm stock availability near you
